Gaming Performance using Quake 4, Battlefield 2 & Half Life 2 Episode 1

Our gaming performance analysis starts out with Quake 4 running at 1600 x 1200 with High Quality visual settings. We used version 1.2 of Quake 4 and SMP was enabled:

Gaming Performance - Quake 4 v1.2

The performance advantage in Quake 4 starts off high, but not astronomical for the Core 2 processors. The Core 2 Extreme X6800 is just over 11% faster than the Athlon 64 FX-62, mainly because we're looking at it in a more GPU bound light than we have in the past. Regardless, it is a performance advantage and far better than the older days of NetBurst chips where Intel's best could barely keep up with AMD.

Looking at Battlefield 2 performance, Intel begins to improve its gaming performance lead as we are becoming more CPU bound:

Gaming Performance - Battlefield 2 v1.22

The Core 2 Extreme X6800 now attains a 19% performance lead over the FX-62, and the E6600 manages a 10.9% advantage itself.

Next up we've got the recently released Half Life 2: Episode 1, running at default quality settings (auto detected with a pair of X1900 XTs installed) with the exception of AA and aniso being disabled. As with all of our gaming tests in this article we tested at 1600 x 1200:

Gaming Performance - HL2: Episode One

Half Life 2: Episode 1 provided us with numbers closer to what we saw with Quake 4, the performance advantage here is just over 12% for the X6800 over the FX-62. With a couple of speed bumps, AMD could equal Intel's gaming performance here. But the real issue for AMD is the fact that the E6600 priced at $316, is able to outperform the FX-62 at over twice the price. The E6300 continues to provide a great value but isn't nearly as impressive as the rest of the Core 2 line.

Gaming with Core 2 and CrossFire on 975X Gaming Performance using F.E.A.R. & Rise of Legends
Comments Locked

202 Comments

View All Comments

  • ianwhthse - Friday, July 14, 2006 - link

    Hmm... some more investigating.

    Firefox leaves space for the images, so I right-clicked and sure enough, I've got a link. "View Image" to look at a single .png, and I get a white blank screen (properties of this particular image says 446px by 654px, 0.04kb in size).
  • JarredWalton - Friday, July 14, 2006 - link

    I'm using Firefox without trouble. Possibly some firewall setting is getting in the way? We had a few brief issues earlier tonight, but that only lasted a few minutes (and we're not sure what happened). If IE and FF both lack images, it sounds like something outside of browser. One note is that I think our image server (images.anandtech.com) blocks access to images if you don't allow the referring URL to be passed along. Meaning, if you were to get the URL of an image and paste that directly into a browser, the image would show up as a 1x1 blank file. Not sure if that affects the graphs as well or not.
  • ianwhthse - Friday, July 14, 2006 - link

    It was the referer info being blocked that was doing it, kinda annoying. Thanks a million.
  • JarredWalton - Friday, July 14, 2006 - link

    Norton is the devil, I swear. They were great when Peter Norton was actually involved, but now it's just a name, and every release gets worse IMO. Norton Internet Security 2002 (2001?) was good; 2003 became a bit worse. 2005 was garbage and I never tried it again. I don't even run software firewall/anti-virus anymore. I've got a hardware firewall, surf with Firefox, password protect my PCs, and don't open stupid email messages. That only works because I'm the only one on the network/PCs, of course. :)
  • ianwhthse - Friday, July 14, 2006 - link

    Yeah, I run an old corporate edition from maybe 2001-2002 because I can't stand the fat of the newer releases. And it's just worked well for me otherwise, I've got a newer edition sitting around in some pile of disks in some closet, but I tried it, hated it, went back.

    I've got a hardware firewall, software firewall, AV, surf w/Firefox, anti-Spyware, AND try not to do anything stupid -- I got'cha beat =P
  • ianwhthse - Friday, July 14, 2006 - link

    Hmm...

    I see all the ads on the page (newegg, zipzoomfly, thermaltake, crucial, etc.) that seem to be flash. I also see the images for the header of the page (the Anandtech logo at the top of the page), but it's just the images in the review that are invisible.

    Hmm... I told the firewall (Norton) to lower my protection, and nothing [either browser]. I'll give it a stab disabled.

    *sign* Okay, charts worked w/o Norton running... (even on minimum protection, they wouldn't come up). I guess I'm off to delve into what setting is going to be doing that.
  • Gary Key - Friday, July 14, 2006 - link

    If you are using Opera 9 or 8, did you turn on "refferer" logging under tools - quick preferences or the advanced - network option?
  • xFlankerx - Friday, July 14, 2006 - link

    Excellent article, by far the most detailed released yet. Yea, the E6400 was a rather important part since it's supposed to be equal to AMD's flagship FX-62, but its easy enough to figure out how it would perform from the other processors' performance.

    As for Conroe availability; 25% of Intel's total output should be more than enough. 20% of Intel's manufacturing capacity equals 100% of AMD's. If there is no shortage of AMD processors, 25% of Intel's total output should be more than enough to supply the market with enough processors?

    DigiTimes also reported that Intel will be charging everyone roughly the same price for the processors. Dell might not get the processors for half-off after all.

    That said, these processors are amazing. By far the greatest thing since the Athlon 64 almost 5 years ago. Fun stuff.
  • mikaela - Tuesday, March 16, 2010 - link

    yes, well-written. i also love the images provided here. thanks i can use the info here to write my essay college essay requirements
  • Suraj - Friday, October 20, 2006 - link

    Great article. How did they overclock the e6600? Did they use the same parts listed in "The test" ?

Log in

Don't have an account? Sign up now